Hardware characteristic
|
| Port |
1 optical port (SC/UPC fiber optical interface),1310/1490nm EPON signal.
|
1 CATV optical port(SC/APC fiber optical interface),1 coaxial cable RF output port. |
4 *10/100Base-T self-adaption LAN port
|
| Tansmission rate |
Uplink and downlink 1.25Gbps
|
| LED indicate light |
indicates ONU power working state
|
PON,LOS,RUN,LAN1-LAN4,CATV indicates the state of ONU registration,ONU running, the state of link and active of LAN port, CATV light input
|
| Reset |
Provide hardware reset button,long press to restore factory settings
|
| Power supply |
12V/1A DC power input
|
Power consumption
| < 8W |
Working environment temperature | -10℃～45℃ |
| Working environment humidity | 5%~95%(non-condensing) |
Storage environment temperature
| -20℃～70℃ |
Storage environment humidity | 75%(maximum) |
| Size | 200mm×150mm×36mm |
| Weight | <1Kg |
Service characteristic |
| Ethernet port | Support port MDI/MDIX self negotiation |
| Support 802.3x flow control |
| support each port uplink and downlink speed limit |
| Support storm suppression |
| Support port MAC restrictions |
| Support port isolation |
| Support STP |
| Support port mapping |
| VLAN | Support 802.1Q VLAN |
| Support SVLAN |
| Support 4k VLAN |
| Support CTC VLAN |
| multicast | Support IGMP Snooping |
| Support 64*4 group multicast |
| Support CTC controlled Snooping |
QoS | support source MAC,destination MAC,VLAN priority,VLAN ID,Ethernet frame type,source IP,the destination of IP stream |
| support 802.1p,DSCP and TOS |
| Support SP priority scheduling algorithm |
| PON port | Compatible CTC |
| compatible 802.3ah |
| Support 8 priority queues and SP scheduling algorithms |
| Support Dysing Gasp |
| Management maintenance | Support CLI |
| Support Telnet |
| Support WEB management |
| Support Firmware remote and local upgrade |
| MAC address | Support 2K MAC address table |
| Supports static MAC addresses |
| Support MAC address blacklist |
| MAC aging time can be configured |
